Bricklaying and rendering quote checklist
10 checks for comparing bricklaying and render quotes on a Pakenham 3810 home before you sign.
Comparing two or three bricklaying quotes is hard when each one describes the job differently. This checklist has 10 sections covering the points that most often differ between quotes for walls, repairs, repointing and rendering in Pakenham 3810. Work through it before you accept a quote. It is general guidance, not legal advice.
How to use this checklist
Lay the quotes side by side and go through each section below. For each point, note whether the quote covers it, excludes it or does not mention it. Anything not mentioned is worth a question to the provider. A lower total often reflects a smaller scope, a different material or an assumption about access, rather than a better deal.
Keep your notes with the quotes. If you accept one, the notes help you check that the final contract matches what was discussed.
1. Who is quoting
Start with the basics about the business:
- Business name, ABN and contact details on the quote
- The name of the person who inspected and who will do or supervise the work
- Registration or licence details where the work requires them
- Whether the business carries public liability insurance, and a copy of the certificate if you want it
The Building and Plumbing Commission keeps a public register of registered building practitioners and licensed plumbers. Some building work in Victoria must be carried out by a registered practitioner, depending on its type and value. If you are unsure whether your job is one of them, ask the commission or a building surveyor.
2. What work is included?
The scope is the most important part of any quote. Check that it describes:
- The exact walls, areas or structures included, ideally marked on a photo, sketch or plan
- Dimensions: length, height, thickness, number of piers or openings
- Demolition of existing work, if any
- Preparation, such as raking joints, removing paint or cleaning
- The finished result: face brick, bagged, rendered, painted, capped
Vague descriptions such as “repair front fence” or “render house” leave room for disagreement. A good quote says which parts of the fence or which walls of the house.
3. Materials and products
Brick, block, mortar and render products vary in appearance, durability and cost. The quote should name:
| Material | What to look for |
|---|---|
| Bricks or blocks | Product name, range and colour, or a note that matching is required |
| Mortar | Type and colour, and whether a trial panel is included |
| Reinforcement and grout | For block walls, bar sizes and core fill |
| Render system | Product or system name and number of coats |
| Capping | Brick on edge, precast, stone or render |
| Flashings, ties and lintels | Type and material |
If a quote says “bricks to match”, ask how the provider will source them and whether you will approve a sample before they order. Our extension brickwork page explains brick matching in more detail.
4. Footings, structure and engineering
For new walls, retaining walls, piers and openings, check:
- Footing size and depth, and whether it is based on engineering or the provider’s own assessment
- Who provides the engineering design, and whether its cost is included
- Reinforcement in footings and walls
- Lintels and temporary propping for openings
- Movement joints and where they will be placed
If two quotes assume different footings for the same wall, the difference in price may be justified. Ask each provider why they chose their footing. For retaining walls, see the retaining walls page.
5. Are permits and approvals covered?
Some masonry work needs a building permit, and some needs planning or estate design approval. Check:
- Whether the provider believes a permit is needed, and why
- Who applies for it and pays the fees
- Whether estate design guidelines apply and who seeks approval
- Whether the work is near a boundary and how the neighbour will be involved
Cardinia Shire Council and registered building surveyors can confirm permit requirements. Do not rely on a provider’s assurance alone for structural work, retaining walls or boundary walls.
6. Access, equipment and site protection
Access assumptions change cost a lot. Look for:
- How materials will be delivered and where they will be stored
- Scaffolding, mobile platforms or ladders, and whether hire is included
- Protection of windows, paving, roofs, plants and neighbouring property
- Parking and any council permit for skip bins or works on the nature strip
- Arrangements for pets, children and household access during the work
A quote that assumes easy side access may increase if barrowing or extra equipment is needed. Tell every provider about access constraints at the start so their quotes are comparable.
7. Weep holes, vents, damp-proof course and drainage
These details are easy to miss and costly to fix later. Ask each provider to confirm:
- Weep holes will be kept open or installed in new work
- Sub-floor vents will not be covered
- Render will stop above the damp-proof course
- Drainage behind retaining walls and at the base of walls is included
- Where collected water will be discharged
Our guide to weep holes and damp explains why these details matter.
8. Cleaning, rubbish and making good
Check what the site will look like at the end:
- Brick cleaning method and whether it is included
- Removal of rubble, spoil, offcuts and packaging
- Making good of disturbed paving, garden beds or lawn
- Touch-up of adjacent painted surfaces if affected
Spoil removal from footing excavation and demolition can be a large item. A quote that leaves spoil on site is not comparable with one that removes it.
9. Price, payments and variations
Look at how the price is structured:
| Item | Questions to ask |
|---|---|
| Total price | Is it fixed, or an estimate? Is GST included? |
| Deposit | How much, and when is it due? |
| Progress payments | Linked to which stages? |
| Provisional sums | Which items are allowances that may change? |
| Variations | How are extra works priced and approved? |
| Hidden problems | What happens if rotten framing, rusted lintels or poor soil is found? |
Victorian law places limits on deposits and requires written contracts for some domestic building work. The Building and Plumbing Commission and Consumer Affairs Victoria publish owner guidance on deposits, contracts and payments. Read it before signing a larger job.
Avoid paying in full before work starts. Link payments to completed stages you can check.
10. Timing, weather and warranties
Finally, check:
- Expected start date and duration
- How weather delays are handled
- What warranty the provider gives on workmanship, and for how long
- Manufacturer warranties on products such as render systems, and their conditions
- What records you will receive at the end, such as product names and colours
Keep all records together. If a problem appears later, you will need them.
Red flags when comparing quotes
Some signs suggest caution:
- A price far below the others without a clear reason
- Pressure to sign or pay immediately
- Requests for full payment upfront or cash only
- No written quote, or a quote with no business details
- Reluctance to provide registration or insurance details
- Dismissal of permit questions for structural or retaining work
None of these prove a problem, but each is worth a follow-up question.
Questions that apply to specific jobs
Each type of work has extra points to check. The relevant service pages list them:
- Mortar repointing: mortar compatibility, trial panels, raking method
- Rendering and finishes: preparation, render system, control joints
- Brickwork repairs: cause of damage, brick matching, lintels
- Brick fences and pillars: footings, gate hardware, estate rules
- Outdoor kitchens and barbecues: appliance cut-outs, ventilation, licensed connections
A simple comparison table
Copy this table onto paper or a spreadsheet and fill it in for each quote.
| Point | Quote A | Quote B | Quote C |
|---|---|---|---|
| Scope matches what I asked for | |||
| Materials named | |||
| Footing and engineering | |||
| Permits and approvals | |||
| Access and equipment | |||
| Weep holes, vents, drainage | |||
| Cleaning and rubbish | |||
| Payment schedule | |||
| Variations process | |||
| Warranty |
After you choose
Once you accept a quote, make sure the written contract or acceptance reflects the scope you agreed, including any changes made during discussion. Keep copies of drawings, product selections and colour samples. Take photos before work starts and at each stage.
Getting comparable quotes in the first place
Quotes are easiest to compare when every provider quotes on the same brief. Before anyone visits, write a one-page description of the job: what you want done, the areas involved, the finish you want, any drawings or engineering, access details and your timing. Give the same page to each provider. If one provider suggests a change, such as a different render system or a deeper footing, ask the others whether they agree, so you are not comparing a cheaper version of one job with a fuller version of another.
Be present for site visits if you can. Walk the provider around the area, point out problems you have noticed and ask them to show you anything they find. Take notes of what they say about causes and methods, because these often differ more than the prices do.
Keep a copy of each quote you compare
Ask every provider to put their quote in writing, on a business letterhead or quote template with their details, even for small jobs. Verbal prices are easy to misremember and hard to rely on if the job changes. Store all quotes together with your own brief, the photos you sent and any drawings, so you can check later which version of the job each quote was based on.
If a provider revises their quote after a second visit or a change in scope, ask for a new version with a date rather than handwritten changes. When you accept, reply in writing confirming which quote and date you are accepting, any agreed changes and the expected start date. That simple paper trail heads off most misunderstandings about what was included.
Comparing more than three quotes
Some owners collect four or five quotes on a large job. More quotes can help, but they take time for you and for providers, and the comparison becomes harder. Three well-briefed quotes on the same scope are usually enough to see a fair range and the different approaches. If quotes vary widely, ask the highest and lowest providers to explain the difference. The answers often reveal scope differences or risks one provider has seen and another has not, which is more useful than another number.
Getting quotes through this site
If you want quotes to compare, send your project details through the quote request form. We may pass them to up to three independent local bricklaying and rendering businesses, who can contact you to inspect and quote. We do not prepare or check quotes ourselves. The Pakenham area page has local notes that may help you brief each provider. Yes Right Pty Ltd operates this referral site.