Brick openings and alterations in Pakenham
Plan new or enlarged openings in brick walls in Pakenham: lintels, support during works, permits, flashings and who designs and checks the change.
Illustrative image, not a completed customer project.
Cutting a new door or window into a brick wall, widening an opening or bricking one up is structural work. In Pakenham 3810 these jobs often come with a renovation, a new sliding door to the backyard or a garage conversion. This page sets out what needs to be decided and by whom before a bricklayer can quote.
Typical alteration jobs
The alterations bricklayers are asked about most often around Pakenham:
- A new sliding or bifold door opening onto a deck or alfresco area
- Widening an existing window into a door
- Enlarging a garage door opening, or bricking up a garage door during a conversion
- A new window in a kitchen, laundry or bathroom
- Bricking up an unused door or window
- Replacing a cracked or rusted lintel over an existing opening
- Removing part of a brick wall between rooms in a double brick house
Each one changes how load passes through the wall. The bricks above any opening are carried by a lintel, usually a steel angle in brick veneer or a heavier section in double brick or wide openings. Making an opening wider means the lintel, and sometimes the supports at each end, must change.
Brick veneer and double brick are different
Most Pakenham homes built from the 1970s onwards are brick veneer. The brick skin is mainly cladding, tied back to a timber or steel frame that carries the roof. An opening in a veneer wall needs a matching opening in the frame, with a new frame header sized for the load above. The carpenter and the bricklayer both have work to do, and the order matters.
Older homes and some outbuildings are double brick, with two skins of brick separated by a cavity. In double brick the masonry itself carries the roof and floor loads. Openings in these walls need lintels designed for that load and temporary support while the wall is cut. Some solid brick walls inside older houses are also load bearing.
If you are unsure what type of wall you have, look at the thickness at a door or window opening, or check original plans. A provider will confirm on site.
| Wall type | Who usually carries the load | What an opening needs |
|---|---|---|
| Brick veneer external wall | Timber or steel frame | Frame header plus lintel for the brick skin |
| Double brick external wall | Both brick skins | Lintels for both skins, temporary propping |
| Internal solid brick wall | The wall itself, often | Engineer advice before any removal |
| Freestanding garage or shed wall | The masonry | Lintel and possibly new piers |
Engineering and permits
Structural alterations usually need someone to size the lintel and confirm the supports. For a straightforward veneer opening a builder may use published span tables. For wider openings, double brick, or anything unusual, a structural engineer’s design is common. Ask the provider whether your job needs engineering and who arranges it.
Many structural alterations need a building permit. Cardinia Shire Council or a registered building surveyor can tell you whether yours does. The Building and Plumbing Commission explains owner responsibilities on its website. Do not start cutting until the approval question has been answered. Unapproved structural work can cause problems at sale time and with insurance.
Some alterations are best managed by a registered builder who coordinates the carpenter, bricklayer, window installer and any plumber or electrician. If your project involves several trades, consider whether a builder should run it, with the bricklayer as one part.
Temporary support during the work
When a wall is cut, the load above it must be held up until the new lintel is in place and bedded. For veneer walls this may be simple. For double brick walls it often involves needles through the wall supported on props, or other temporary works. The provider should explain the method and who is responsible for it.
Ask about the sequence. A typical sequence for a new veneer opening is: frame header installed by a carpenter, brickwork cut and removed, lintel installed, brick returns made good, flashing fitted, window or door installed, joints and reveals finished. The timing between trades can affect how long a wall is open to the weather.
Flashings and moisture
Every opening in a brick wall needs a way to deal with water. Flashings over the lintel direct water that gets into the cavity back out through weep holes. Sill details under windows stop water running into the wall. Missing or poorly fitted flashings are a common cause of leaks around new openings.
Ask the bricklayer how flashings will be installed and where the weep holes will go. If a window installer fits the frame, check who is responsible for the flashing interface. Our guide to weep holes and damp explains how moisture moves through a cavity wall.
Bricking up an opening
Filling an old opening is common in renovations and garage conversions. The new brickwork needs to be tied into the surrounding wall, follow the existing coursing, and include weep holes and a damp-proof course at the right level. In a veneer wall, the frame behind may need new studs and wall ties.
The hardest part is often appearance. Bricks for the infill should match the wall. If the house brick is no longer made, options include salvaged bricks from elsewhere on the property, recycled bricks, or rendering the whole wall. The brickwork repairs page covers brick matching in more detail.
Garage conversions in particular need thought about the slab level, damp proofing and the step between garage floor and house floor. These are building design questions to resolve with a builder or building designer before the bricklayer arrives.
Replacing a failed lintel
Steel lintels can rust over time, especially near the coast or where flashings have failed. Rust expands the steel, which can push up the brick course above and crack the wall, often in a stepped pattern from the corners of the opening. Sagging brickwork over a window is another sign.
Lintel replacement means removing brickwork above the opening, supporting the wall, fitting a new lintel and relaying the bricks. It is a common repair and a good bricklayer will have done many. Ask what type of lintel they will fit and how it will be protected against corrosion.
Bricks, reveals and finishing
New openings expose cut brick faces at the sides, called reveals. These may be finished with whole bricks returned into the opening, cut bricks, render or a window frame that covers the edge. Discuss the look you want. On a face brick house, neat brick returns make the opening look original.
Sills below windows can be brick on edge, a precast sill or part of the window frame. The choice affects how water drains away and how the opening looks from outside.
Questions for the provider
Before accepting a quote for an opening or alteration, ask:
- Is my wall load bearing, and how did you decide?
- Who is designing the lintel and supports?
- Does this work need a building permit, and who will apply?
- Who installs the frame header, the lintel, the flashing and the window or door?
- How will the wall be supported during the work?
- How will you match the brick and mortar at the reveals?
- What happens if you find rotten framing, rusted ties or other hidden problems?
Write down the answers. Our bricklaying quote checklist has a broader list for comparing quotes.
Extensions and new walls
If the opening is part of an extension, the brickwork for the new rooms raises matching and junction questions too. See the extension brickwork page for how new brick walls are tied to an existing house and how colour matching is handled.
Local context
Requests for new openings come from across Pakenham, Beaconsfield and Officer, often from owners of 1990s and 2000s brick veneer homes adding an alfresco area or opening a family room to the garden. Older homes in Beaconsfield and the Pakenham township are more likely to have double brick or mixed construction. The Beaconsfield area page describes the housing mix there.
Security and weather while the wall is open
A new opening in an external wall leaves the house exposed until the door or window is installed. Ask the provider and any builder how the opening will be secured overnight and protected from rain. Common approaches include temporary framing with sheet material, a tarpaulin over the opening, or scheduling so the window or door is fitted the same day or the next. If the new unit is on a long lead time, consider waiting until it has been delivered before cutting the wall.
Inside the house, expect dust to travel. Seal off the room with plastic sheeting, move furniture away from the wall and cover floors. Cutting brick and plasterboard produces fine dust that settles everywhere, and brick dust contains silica, which should not be breathed in. A competent provider will have a dust control method and will explain it.
Finishing inside after an opening
The bricklayer works on the outside skin, but a new opening also affects the inside of the house. Plasterboard or render needs cutting and making good around the new frame, architraves need fitting, floors may need patching where an old wall or sill was removed, and painting follows. Electrical outlets or switches on the affected wall may need moving by an electrician.
Ask who is responsible for each of these tasks. If you are coordinating trades yourself, list them in order so nobody is waiting on someone else. A builder managing the project will normally handle the sequence and the finishing work.
Openings near corners and existing services
New openings close to the corner of a house, near an existing window, or where pipes and cables run in the wall need extra care. Brickwork near corners carries load around the building, and an opening too close to a corner may need extra support. Plumbing, gas and electrical services in the wall cavity must be located before cutting. An electrician or plumber may need to relocate them first. Ask the provider how they will check for services and how much clearance they need from corners and other openings.
Next step
When you are ready, describe the alteration on the enquiry page. Say what opening you want, its approximate size, the wall type if known, whether plans or engineering already exist, and whether a builder is involved. We forward the request to a maximum of three independent providers around Pakenham. Each provider decides whether the job suits them, then arranges a visit and quotes on its own terms. Yes Right Pty Ltd runs this referral site and does not carry out building work.