Find help with bricklaying and rendering around Pakenham.

Brick barbecues and outdoor kitchens in Pakenham

Plan a brick or block outdoor kitchen, barbecue surround or fire feature in Pakenham: layout, gas and power, heat, drainage and fire safety questions.

Brick barbecues and outdoor kitchens in Pakenham

Illustrative image, not a completed customer project.

Outdoor kitchens, built-in barbecues and fire features in Pakenham 3810 backyards are often built with brick or rendered block. The masonry is usually the simplest part. Gas, power, water, heat and fire safety need sorting first. This page sets out what to plan and who handles each piece before a bricklayer quotes.

What masonry is used for

Bricklayers are asked to build several types of outdoor cooking and heating structures:

  • A brick or block bench to house a built-in gas barbecue
  • A full outdoor kitchen bench with sink, fridge space and storage
  • A base and surround for a pizza oven, either a kit oven or a pre-made dome
  • A traditional wood-fired barbecue with a firebox and chimney
  • A fire pit or outdoor fireplace
  • Low walls and seating that frame an alfresco or entertaining area

Most modern outdoor kitchens are a masonry or steel frame clad in render, tiles, stone or brick, with a benchtop of stone, concrete or tiles. The bricklayer may build the carcass and leave cladding and benchtops to other trades, or handle more of the finish. Clarify the scope early.

Start with the appliances

Buy or at least select the barbecue, side burner, sink, fridge and any rangehood before the masonry is designed. Each appliance has cut-out dimensions, clearance requirements and ventilation needs in its installation instructions. A built-in barbecue in particular often needs ventilation openings in the enclosure so gas cannot build up, plus heat clearances to combustible materials.

Give the bricklayer the installation manuals, not just the outside dimensions. Building a cavity that is a few millimetres too small, or forgetting ventilation, can mean demolishing part of the bench later.

Appliance Information the bricklayer needs
Built-in gas barbecue Cut-out size, ventilation, clearances, gas inlet position
Outdoor fridge Ventilation space, power point position, door swing
Sink Bowl size, tap holes, waste and water connection points
Pizza oven Base size, weight, insulation layer, flue height
Rangehood Mounting structure, duct route, power

Gas, power and water

Connecting gas appliances is restricted work in Victoria. A licensed gasfitter must do the gas connection and check the installation. Energy Safe Victoria regulates gas safety and has information for owners. Do not let anyone without the right licence connect gas.

Power points, lighting and fridge circuits outdoors must be installed by a licensed electrician. Outdoor power points need suitable weatherproofing and protection. Plan conduit routes so they can be built into the masonry instead of surface-mounted later.

Sinks need a water supply and a waste connection, which is plumbing work for a licensed or registered plumber. Where the waste will drain is a key question, because outdoor sink waste generally cannot just run into the garden or a stormwater pit. The Building and Plumbing Commission has guidance on what plumbing work needs a licensed practitioner.

Coordinate the order of trades. Usually the plumber and electrician lay underground pipes and conduits first, then the bricklayer builds, then the gasfitter, electrician and plumber return to connect fittings.

Heat and fire safety

Masonry handles heat better than timber, but not every brick or mortar is suited to direct flame. Firebox linings for wood-fired barbecues and fireplaces typically use firebricks and refractory mortar rated for high temperatures. Using ordinary bricks in a firebox can lead to cracking and spalling. Ask the provider what materials they will use in the hottest zones.

Pizza ovens often need an insulating layer between the oven floor and the masonry base, and the flue needs clearance from eaves, pergolas and trees. Follow the oven manufacturer’s instructions.

Pakenham and the nearby hills sit in areas where fire danger is a real seasonal issue. Some parts of Cardinia Shire are in designated bushfire prone areas. The CFA publishes rules on when you can light fires in the open during the Fire Danger Period, including conditions for barbecues and pizza ovens. Check the CFA’s “Can I or can’t I” guidance for your location before planning a wood-fired feature, and think about how it will be used safely on hot, windy days.

Location, slab and drainage

Outdoor kitchens and fireplaces are heavy. A masonry bench, stone top and appliances can weigh far more than a typical paved area is designed to carry. The structure usually needs its own footing or a slab designed for the load. If it is going on an existing deck, an engineer or builder must confirm the deck can take it, and masonry on a timber deck is often unsuitable.

Think about rain and drainage. Water running off a paved area or a roof can pond against the base of a bench and soak into the masonry. Position the kitchen so water runs away, and allow for drainage under benchtops and around sinks.

Consider prevailing winds. Smoke and cooking heat should blow away from the house and seating. A wall on the windward side can make an area more usable through Pakenham’s cooler months.

Covered areas and permits

Outdoor kitchens are often under a pergola or verandah. A roof structure, and a flue or chimney passing near or through it, raises building and fire questions. Some pergolas and verandahs need building permits. A fireplace or chimney may also need one. Check with Cardinia Shire Council or a registered building surveyor before construction.

Rangehoods over barbecues under a roof need a suitable duct route and clearances. Combustible ceilings above a barbecue are a known risk.

Finishes

Popular finishes for outdoor kitchen masonry around Pakenham include face brick to match the house, rendered block painted to suit the alfresco, tiles, stacked stone cladding and concrete benchtops. Each has upkeep needs. Rendered surfaces need occasional repainting, tiles need grout care and stone needs sealing. Ask the provider which finishes they handle and which need another trade.

Splashbacks behind a barbecue take heat and grease, so choose a material that cleans easily. Benchtops near the cooking zone should handle hot pans and outdoor weather.

The rendering and finishes page has more on render options.

Questions for the provider

  1. Which parts will you build, and which parts need other trades?
  2. What footing or slab will the structure sit on?
  3. How will the barbecue enclosure be ventilated?
  4. What materials will you use in the firebox or hottest areas?
  5. Will conduits and pipe sleeves be built in as you go?
  6. How will water drain away from the bench and sink?
  7. Is a building permit required, and who arranges it?

The bricklaying quote checklist has further questions for comparing quotes.

Maintaining outdoor masonry

Outdoor masonry gets grease, smoke, rain and sun. Clean grease off brick and render regularly with mild methods, check capping and joints for cracks, and keep drainage clear. Firebricks may crack over years of heating and cooling, and replacement is a normal maintenance task. Our brick and render maintenance guide covers general upkeep.

Backyards around Pakenham

Larger blocks in Pakenham, Beaconsfield and Pakenham Upper often have room for a full outdoor kitchen. Smaller courtyard lots in Officer and Clyde North estates more commonly suit a compact barbecue bench against a boundary wall, where fire clearances and neighbour impact need thought. The Beaconsfield area page has more on local housing.

Benchtops, doors and storage

The masonry carcass of an outdoor kitchen needs to suit whatever goes on and in it. Stone and concrete benchtops are heavy and need support at the right spacing, so tell the bricklayer the benchtop material before they build. Overhangs for bar seating may need steel supports built into the masonry. Openings for cupboard doors and drawers must match the sizes of the outdoor-rated doors you plan to buy, and the doors need something solid to fix hinges to.

Masonry cavities under benches collect water, leaves and spiders. Ask how the base of each cavity will drain and whether a floor will be formed inside. Doors made for outdoor use, such as stainless steel or marine-grade materials, last longer than indoor cabinetry in an open alfresco. If the area is only partly covered, rain will reach some of the bench, so allow for it in the material choices.

Lighting, shade and seating

Good lighting makes an outdoor kitchen usable on winter evenings, which arrive early in Pakenham from May to August. Plan task lighting over the cooking area and softer lighting for seating. Light fittings, switches and cabling must be installed by a licensed electrician and rated for outdoor use. Conduits built into the masonry make a tidier job than surface-mounted cabling.

Built-in seating walls, planters and low screen walls can frame the area and give shelter from wind. Keep seating a safe distance from fireboxes and pizza ovens, and consider where smoke will drift on the usual wind directions. If you plan shade sails or a pergola, ask whether fixing points can be built into the masonry.

Built-in heaters and outdoor fireplaces

Outdoor fireplaces and built-in heaters are a different job from a barbecue bench. A wood-burning fireplace needs a firebox, a throat and a flue or chimney tall enough to draw well and clear of the house roof, eaves and trees. A gas outdoor heater or fireplace insert has its own installation instructions, clearances and ventilation requirements, and must be connected by a licensed gasfitter. Some products come as complete units that the bricklayer only needs to enclose. Choose the appliance or kit first, then have the masonry designed around it. A fireplace or chimney may need a building permit, so check before work starts.

Cleaning and upkeep of outdoor kitchen masonry

Grease and smoke build up on bricks and render around a barbecue, especially on the splashback and the underside of benchtops. Wipe fresh grease off with warm water and a mild detergent rather than letting it soak into porous brick. Avoid harsh acids and high-pressure water near the cooking area, which can etch surfaces and drive water into joints. Check capping, benchtop joins and the base of the bench each autumn for cracks or gaps where water can enter. Keep drain holes under sinks and cavities clear so water does not sit inside the structure over winter.

Get in touch

Use the outdoor kitchen enquiry form to describe the structure, its size, the appliances chosen, whether gas, power and water are needed, and where it will sit. A rough sketch and photos of the area help. We pass the enquiry to as many as three independent masonry businesses around Pakenham, who decide whether to contact you and quote. You contract with the provider you choose. Yes Right Pty Ltd operates this referral site and does not build outdoor kitchens or connect services.

Send an enquiry