Extension brickwork in Pakenham
Plan brickwork for a home extension in Pakenham: matching bricks, tying new to old walls, slab levels, builder coordination and permit responsibilities.
Illustrative image, not a completed customer project.
Extensions to brick homes in Pakenham 3810 need new brickwork that looks like it belongs and joins the original house without cracking. Matching bricks, coursing and mortar is usually the visible challenge. Behind that sit questions about footings, movement joints, flashings and who manages the project. This page covers what to sort out before bricklayers quote.
Who runs an extension project
Most extensions involve several trades: excavators, concreters, carpenters, bricklayers, roofers, plumbers, electricians and finishers. In Victoria, domestic building work above certain thresholds must be carried out by a registered building practitioner under a major domestic building contract, and owner-builders have their own rules and obligations. The Building and Plumbing Commission explains the requirements and lets you check whether a builder is registered.
In many cases a registered builder manages the extension and engages the bricklayer. If you are engaging a bricklayer directly, as an owner-builder or for a small addition, understand your responsibilities first. A bricklayer can tell you which parts of the job they do and which they do not.
Drawings and approvals
An extension normally needs a building permit, and possibly a planning permit depending on the property and overlays. Drawings from a building designer or architect, engineering for footings and structure, and energy ratings may be required. Cardinia Shire Council and registered building surveyors handle approvals in the area.
The bricklayer works from the approved drawings. Before quoting, they will want to see:
- Floor plans and elevations showing brick areas
- Wall types: brick veneer, double brick or mixed
- Window and door schedules with sizes and head heights
- Slab and footing details, including floor levels
- Engineering for lintels and any special structural elements
- Specified bricks and mortar colour, or a note that matching is required
If drawings are incomplete, a bricklayer can give only a rough idea of cost. Firm quotes need firm drawings.
Matching existing bricks
Owners usually want the extension to look like it was built at the same time as the house. This is easier said than done. Brick ranges are changed and discontinued, colours vary between batches, and older bricks have weathered.
Steps that help:
- Find the original brick name and maker from the builder’s documents, plans or council records
- Remove a spare brick from somewhere hidden, such as a garage wall that will be demolished, to take to suppliers
- Ask brick suppliers for their closest current range and view samples outdoors next to the house
- Consider recycled bricks if the original is no longer made
- Lay a small sample panel with the proposed mortar before ordering the full quantity
Brick size matters as much as colour. Older bricks may differ slightly in height from current ones, which affects whether courses line up with the existing house. A bricklayer can adjust joint thickness within limits, but a large difference may show.
If a close match is impossible, some owners choose a deliberate contrast, such as rendering the extension or using a different cladding, so the difference looks intentional. Others render the whole house. The rendering and finishes page covers that option.
Mortar colour and joint profile
The mortar is a large part of how a brick wall looks. Matching the original mortar’s colour and joint profile, such as ironed, raked or flush joints, is as important as matching bricks. Fresh mortar dries lighter, and old mortar has weathered. A sample panel cured for a week or two gives the best comparison.
See the mortar repointing page for more on mortar colour and trial panels.
Joining new walls to the house
Where new brickwork meets existing brickwork, the two parts will move differently. The existing house has settled over years, while the extension sits on new footings that will settle slightly as it is loaded. Clay bricks also expand slowly over their first years.
Common details at the junction:
- A vertical movement joint between old and new walls, sealed with flexible sealant
- Ties or flexible connectors that allow movement while keeping the walls aligned
- Flashings where a new roof meets an existing wall
- Careful alignment of courses so horizontal joints run through
Toothing new bricks into old brickwork, by cutting out alternate bricks and interlocking the new wall, is sometimes requested for appearance. It can lead to cracking where the two walls move differently. The designer or engineer should specify the junction detail, and the bricklayer should follow it.
Slab levels, damp-proof course and weep holes
The extension slab level should be set so that floor levels inside line up and the brick courses outside align. The damp-proof course in the new walls should sit at a level that works with the existing one and with finished ground levels.
Weep holes at the base of new veneer walls and above openings let cavity moisture escape. They must stay clear of garden beds and paving. Our weep holes and damp guide explains why ground levels against brick walls matter.
Openings in the existing wall
Most extensions open into the existing house through a new or enlarged opening in what was an external wall. That opening needs a lintel, frame changes and careful sequencing so the house stays weatherproof. The openings and alterations page covers this part in detail.
Scheduling and weather
Bricklayers need the slab and frame ready, materials on site and a clear work area. Delays from earlier trades, wet weather or supply problems can push back start dates. Brick deliveries need firm access for a truck and pallet drops.
Pakenham’s wet winters can slow footing and laying work. A realistic program from the builder, with some allowance for weather, avoids frustration.
| Stage | Typical trade | Brick-related check |
|---|---|---|
| Footings and slab | Concreter or builder | Levels and edge rebates for brick |
| Frame | Carpenter | Frame plumb, ties fixed, flashings in place |
| Brickwork | Bricklayer | Brick match, coursing, weep holes, movement joints |
| Roofing | Roofer | Flashings at wall junctions |
| Windows and doors | Builder or installer | Sill and head details |
| Cleaning | Bricklayer or cleaner | Mortar smears removed safely |
Cleaning and handover
New brickwork is usually cleaned at the end of laying to remove mortar smears. The method should suit the brick. Efflorescence on new walls is common in the first months as construction moisture dries out and usually brushes off. The brick cleaning page explains stains and methods.
Keep a record of the brick product, batch, mortar mix and colour. If you need to repair or extend again, this saves guesswork.
Questions to ask
- Who is managing the overall project, and who engages the bricklayer?
- Have you seen the approved drawings and engineering?
- Where will the brick come from, and can I see a sample panel?
- What junction detail will be used between old and new walls?
- How will course heights and slab levels be matched?
- Is brick cleaning included?
The bricklaying quote checklist lists further points to compare.
Extensions around Pakenham
Extension enquiries come from across Pakenham, Officer and Beaconsfield, often for family rooms, extra bedrooms or alfresco areas on 1990s and 2000s brick veneer homes. Older homes in Beaconsfield and the Pakenham township can present harder brick matching. The Pakenham area page has more on local housing.
Second-storey additions on brick homes
Adding a level to a single-storey brick house raises different masonry questions from a ground-floor extension. Most upper additions in the area are framed and clad in lightweight materials rather than brick, because the existing walls and footings were not designed to carry another storey of masonry. Where brick is wanted upstairs, an engineer must confirm the footings and lower walls can take the extra load, and strengthening may be needed.
Even with lightweight cladding upstairs, the existing brickwork is affected. New posts or steel beams may need to bear on the brick walls or on new footings beside them. Flashings where the new upper wall meets the existing roof and brickwork are critical to keep water out. Ask the builder and bricklayer who details and installs those junctions. If the lower brick walls show cracking or worn mortar, it makes sense to repair them before the upper level goes on, while scaffolding is already in place.
Garages, carports and attached structures
Brick garages and carports attached to a house are common additions. A garage usually needs its own slab and footings, a wide opening with a substantial lintel for the door, and a junction with the existing house wall. Fire separation rules can apply where a garage is close to a boundary or attached to a dwelling, which affects the wall construction. A building surveyor can tell you what applies.
Carports with brick piers carry the roof on the piers, so the piers need suitable footings and connections for the posts or beams. Piers at the edge of a driveway are exposed to car impacts, so position them where they are less likely to be hit. Ask the bricklayer how the roof structure will be fixed to the piers and who supplies the fixings.
Brick sizes and coursing on extensions
Australian bricks are made to a nominal standard size, but actual sizes vary between makers and over time. A difference of a few millimetres in height adds up over a wall. Over a full-height wall, small differences can leave the new courses noticeably out of line with the old ones at the junction, or with window heads that should align. Bricklayers adjust by varying joint thickness slightly, but there are limits before the joints start to look uneven. Measure a few existing bricks and the height of ten courses on your house, and give those figures to the provider and the brick supplier when choosing a new brick.
Lintels over new openings in extensions
Extensions usually include new windows and doors, each needing a lintel to carry the brickwork above. In brick veneer, steel angle lintels sit on the brick at each side of the opening. Their size depends on the opening width and the load, and longer openings need heavier sections or engineered beams. The lintels should be protected against corrosion and paired with flashings that drain any cavity water out through weep holes above the opening. Ask the bricklayer who specifies the lintels and confirm they match the drawings and any engineering.
Send an enquiry
To connect with a bricklayer for extension work, use the extension brickwork enquiry and tell us whether a builder is managing the project, the size of the brick area, the wall type, whether drawings and engineering are complete, and any brick-matching concerns. Up to three independent providers working near Pakenham may receive it and contact you. They quote and contract on their own terms. Yes Right Pty Ltd runs this referral site and is not a builder or bricklayer.